Doorsone-shot · 0.62 s
♥ 0↓ 0@sonicbricks
Elevator Doors Open
Twin steel elevator doors part with an accelerating motor whir, rolling panel rumble and muted stop clunks.
one-shot · 2.53 s · 0 downloads · 0 likes
0.00 / 2.53 sdefault
Tweak
renders in the CLI · WAVChange parameters to build an exact command. Your agent runs it with sb and gets the WAV.
$ sb get 1EPW68626J@1 -o elevator-doors-open.wav
How it's made
- Source
- a belt motor parts two steel elevator panels; drive at 95–210 Hz carries quieter 2nd, 3rd and 6th gear partials, with 0.6 percent speed wander and speed-linked amplitude ripple.
- Body
- independent roller noise excites broad steel bands near 135, 310 and 690 Hz; guide friction occupies 450–2400 Hz. Panels separate gently in stereo around the central motor.
- Envelope
- 0.3 s acceleration, steady travel, then 0.55 s controlled deceleration; friction follows speed. Two padded stops 24 ms apart mark full opening near 2.1 s by default.
- Stop
- 9 ms low-passed noise contacts excite panel modes at 92, 173, 327 and 611 Hz with 0.08–0.24 s T60; a 65–85 Hz rubber thump decays in 0.15 s. No latch slam or pneumatic vent.
- Variation
- named RNG streams detune drive and panel bands by 1–3 percent and vary stop strength. Travel, mass, drive prominence and guide wear distinguish passenger, quiet, freight and worn doors.
- Space
- dry close perspective; low-cut at 38 Hz, softened upper spectrum and zero-ended fades.
| Parameter | Range | Default | Unit | Controls |
|---|---|---|---|---|
| travel | 1.65 – 2.7 | 2.08 | s | Opening travel |
| mass | 0 – 1 | 0.55 | — | Panel mass |
| drive | 0 – 1 | 0.55 | — | Motor presence |
| wear | 0 – 1 | 0.3 | — | Guide wear |
| stop | 0 – 1 | 0.5 | — | Stop weight |
| seed | int | 1 | — | Variation, reproducible |
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.
Revision history1
- r12026-10-25engine 1.0.1use('1EPW68626J@1')