Change parameters to build an exact command. Your agent runs it with sb and gets the WAV.
Command
$ sb get SHMBXD9ANS@1 -o radio-select-pop.wav
How it's made
Source
a small air-filled rubber/plastic dimple snapping inward when a radio option is chosen. The snap is a sub-2 ms soft contact (low-passed noise) that excites one dominant, nearly pure cavity tone.
Body
the cavity tone starts around 560 Hz and falls up to an octave in about 35 ms as the dimple relaxes (a pitch-dropping sine); a faint second partial at 2x adds roundness, and a short 120-200 Hz thump gives weight.
Envelope
1.2 ms attack to avoid a click; the tone fades 60 dB in about 55 ms; the thump in about 25 ms.
Variation
`rng` detunes the tone by up to +-2.5 %. Pitch, drop and decay set the size of the pop; the presets range from a tiny bright bubble to a deep soft thud and a dry, nearly pitchless tick.
Parameters
Parameter
Range
Default
Unit
Controls
pitch
320 – 1000
560
Hz
Pitch
drop
0 – 1
0.5
—
How far the pitch falls after the onset
decay
0.03 – 0.12
0.055
s
Decay
body
0 – 1
0.4
—
Body
softness
0 – 1
0.5
—
Softness
seed
int
1
—
Variation, reproducible
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.