Change parameters to build an exact command. Your agent runs it with sb and gets the WAV.
Command
$ sb get YBJ8RDYK9T@1 -o security-keypad-countdown.wav
How it's made
Source
a clocked security-panel piezo driver at 1.25-2.8 kHz; every pulse and final tone share one pitch.
Body
a dominant sine plus weak phase-locked second and third harmonics represent disc nonlinearity. Upper harmonics settle in 25 ms; a 6 kHz low-pass represents the grille, without room reverberation.
Envelope
6 ms rounded startup, 65-105 ms short gates and 16 ms release; the disc rings down for 12 ms. The final 0.75-1.35 s gate sags by 12 percent before a 45 ms release, signalling completed arming.
Timing
10-16 short pulses fill 4.7 s; linearly shrinking intervals end at 18-45 percent of the first. A same-pitch long tone follows at 4.7 s; the default including silent tail is approximately 6 s.
Variation
rng sets one stable device tuning offset within 0.15 percent, never random timing or melody. Presets change register, pulse density, acceleration, gate width and harmonic edge for different panels.
Parameters
Parameter
Range
Default
Unit
Controls
pitch
1250 – 2800
2200
Hz
Panel pitch
edge
0 – 1
0.38
—
Piezo edge
count
10 – 16
12
—
Short pulses
endRatio
0.18 – 0.45
0.22
—
Final interval ratio
gate
0.065 – 0.105
0.085
s
Short gate
finalLength
0.75 – 1.35
1.15
s
Armed tone length
seed
int
1
—
Variation, reproducible
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.