Change parameters to build an exact command. Your agent runs it with sb and gets the WAV.
Command
$ sb get JB4BZ349JJ@1 --preset shockwave -o air-blast-spell.wav
How it's made
Source
a burst of air forced outward. Turbulence is pink noise; the pressure front is a short low sine thump that falls from about 150 Hz to 45 Hz in 0.2 s. The magic adds a swirl of detuned sines.
Body
the rush is band-passed (Q ≈ 0.9) with a centre that leaps from 300 Hz to the peak (1.5-5 kHz) within 0.15 s and then falls back; a narrow resonator on the same curve gives the airy tonal swirl, whose pitch is wobbled by a 5-7 Hz sinusoid so it seems to spin.
Envelope
pressure-first attack (about 12 ms for the thump, 40 ms for the rush), a fast exponential release so the gust is mostly gone by 0.9 s; the swirl lags the rush by 60 ms and fades last.
Layers
thump (pressure), rush (turbulence), swirl (two detuned glassy sines at 1:2 plus resonated air), sparkle (highpassed noise at 6 kHz+ with a short tail). Left and right use separate noise sources.
Variation
`rng` shifts swirl tuning by ±3 % and the peak time by a few percent; `power` sets pressure and brightness, `swirl` the tonal amount, `length` the release, `sparkle` the shimmer.
Parameters
Parameter
Range
Default
Unit
Controls
power
0 – 1
0.6
—
Power
swirl
0 – 1
0.5
—
Swirl
length
0.4 – 1.5
0.85
s
Length
sparkle
0 – 1
0.35
—
Sparkle
pitch
400 – 2000
900
Hz
Swirl pitch
seed
int
1
—
Variation, reproducible
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.