Change parameters to build an exact command. Your agent runs it with sb and gets the WAV.
Command
$ sb get HMCR59MXQG@1 --preset rough-flags -o barrel-roll-on-stone.wav
How it's made
Source
staves and iron hoops rolling on stone; filtered pink friction and 3-9 ms noise contacts.
Body
damped stave modes near 290, 487, 823 and 1310 Hz; hollow barrel air mode at 95-180 Hz. Hoop joints add muted 740/1190/1930 Hz modes, dying in 45-100 ms rather than ringing like bells.
Envelope
twelve soft stave contacts per revolution; a stronger hoop-joint double clunk follows every turn, separated by 24-42 ms. Wood decays in 45-130 ms, the air cavity in about 160 ms.
Motion
a 0.5, 0.667 or 1 Hz revolution rate gives 3, 4 or 6 complete turns in the six-second loop. Rotation and stave-rate pressure modulate friction level and cutoff; stone grain adds tiny impacts.
Variation
seeded contact timing, strength and tuning; size lowers the body, roughness adds grain, hoop prominence changes joint clunks. Presets cover slow empty, brisk small, rough and heavy barrels.
Space
dry, close and centered, with no baked-in room or exaggerated metallic ringing.
Parameters
Parameter
Range
Default
Unit
Controls
pace
slow · steady · brisk
steady
—
Rolling pace
size
0 – 1
0.6
—
Barrel size
roughness
0 – 1
0.45
—
Stone roughness
hoops
0 – 1
0.55
—
Hoop clunks
seed
int
1
—
Variation, reproducible
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.