Metalone-shot · 1.00 s
♥ 0↓ 4@sonicbricks
Bin Lid Clatter
A dropped steel trash can lid: bright plate clang, bouncing rim and an accelerating spinning rattle.
one-shot · 1.80 s · 0 downloads · 0 likes
0.00 / 1.80 sHeavy steel lid
Tweak
renders in the CLI · WAVChange parameters to build an exact command. Your agent runs it with sb and gets the WAV.
$ sb get S0A4FKC77W@1 --preset heavy-steel -o bin-lid-clatter.wav
How it's made
- Source
- a steel bin lid falls rim-first onto a hard floor; 2-5 ms shaped noise excites the plate.
- Body
- a shallow circular plate, not a hollow can; 16 inharmonic modes span 280-6900 Hz. Low flexural modes decay in 0.65 s, upper modes in 0.13 s; split pairs produce metallic beating.
- Events
- first clang, rebounds at 0.19 and 0.43 s, then precessing rim contacts from 0.60 s. Contact intervals shrink from about 100 to 9 ms as the tilt collapses, with falling strength.
- Layers
- coherent plate modes are re-excited by each contact; short filtered friction bursts and a damped 170 Hz floor thump distinguish the rim scrape from the pitched plate vibration.
- Envelope
- contact damping progressively shortens the ring; a final 90 ms fade ends near 2 s.
- Variation
- seeded contact timing, force, mode tuning and subtle stereo movement vary each drop. Presets model a small bright lid, heavy steel, a prolonged spin and a damped floor landing.
| Parameter | Range | Default | Unit | Controls |
|---|---|---|---|---|
| size | 0 – 1 | 0.55 | — | Lid size |
| spin | 0.65 – 1.65 | 1.1 | s | Spin duration |
| hardness | 0 – 1 | 0.7 | — | Floor hardness |
| ring | 0 – 1 | 0.55 | — | Plate resonance |
| seed | int | 1 | — | Variation, reproducible |
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.
Revision history1
- r12026-10-25engine 1.0.1use('S0A4FKC77W@1')