Change parameters to build an exact command. Your agent runs it with sb and gets the WAV.
Command
$ sb get XYK62JHJ9D@1 --preset expanding-pipes -o boiler-room-rumble.wav
How it's made
Source
forced-draft burners produce continuous turbulent pressure, brown noise at 35-240 Hz under a pink-noise combustion roar at 100-950 Hz. Slow 0.13 Hz drift couples level and brightness.
Body
broad furnace cavity bands at 94 and 188 Hz colour the roar without a sustained whistle. A quiet circulating pump contributes 49/98/147 Hz vibration with slow sub-percent speed wander.
Pipes
thermal expansion releases irregular knocks, 0.08-0.70/s. A 3 ms softened noise impulse excites inharmonic steel modes near 185, 431, 773 and 1260 Hz, decaying in 0.16-0.65 s.
Hiss
independent valve turbulence spans 1.4-6.5 kHz, breathing over several seconds; occasional pressure releases rise in 90 ms and fall in 0.9-2.4 s, never opening as a digital step.
Space
short, dark 37/61 ms reflections on pipe knocks suggest a concrete utility room; deep pressure stays central while independent burner and valve beds occupy a restrained stereo field.
Variation
seeded drift, event strengths, pipe tuning (+/-8%) and position vary independently. Presets cover low fire, full firing, expanding pipes and a hissing valve beside a smaller burner.
Parameters
Parameter
Range
Default
Unit
Controls
firing
0 – 1
0.65
—
Burner firing
pipes
0 – 1
0.45
—
Pipe expansion
steam
0 – 1
0.35
—
Valve hiss
pump
0 – 1
0.4
—
Circulating pump
spread
0 – 1
0.55
—
Room width
seed
int
1
—
Variation, reproducible
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.