Change parameters to build an exact command. Your agent runs it with sb and gets the WAV.
Command
$ sb get JF0S7FZHWW@1 --preset subtle -o charger-connected.wav
How it's made
Source
a plug seating in a socket (a 2 ms low-passed contact tick) followed by an electronic "power detected" cue: a fast rising blip, an electric zip and a bright confirming end note.
Body
the blip is a sine gliding 500 -> ~1300 Hz in 90 ms; the zip is a band-limited saw swept 600 -> 5000 Hz through a resonant band-pass (Q ~3) plus a thin high-passed noise fizz; the end note is a struck-tine fundamental with stretched partials (2.01x, 3.02x, 4.2x) that decay faster than the fundamental.
Envelope
tick at 0 ms; blip and zip overlap over 0-130 ms with the zip peaking as the blip ends; the end note strikes at ~120 ms (2 ms attack) and rings 0.2-0.35 s; everything is silent by ~0.5 s.
Layers
contact tick (quiet), blip (main body), zip (movement), end note (brightest, sets the pitch).
Variation
`rng` detunes the end-note partials by +-0.2 % and the glide start by +-2 %; `pitch` moves the end note and the glide target, `zip` scales the sweep layer, `brightness` the upper partials and fizz.
Parameters
Parameter
Range
Default
Unit
Controls
pitch
1000 – 3000
1760
Hz
End note pitch
zip
0 – 1
0.6
—
Zip
brightness
0 – 1
0.55
—
Brightness
ring
0.1 – 0.4
0.22
s
Ring
contact
0 – 1
0.5
—
Plug click
seed
int
1
—
Variation, reproducible
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.