Householdloop · 6.00 s
♥ 0↓ 0@sonicbricks
Cutlery Clatter
A handful of cutlery dropped into a drawer tray, scattering into bright short metal clinks and soft tray knocks.
one-shot · 1.02 s · 0 downloads · 0 likes
0.00 / 1.02 sMixed handful
Tweak
renders in the CLI · WAVChange parameters to build an exact command. Your agent runs it with sb and gets the WAV.
$ sb get XDJC4FDX2G@1 --preset handful -o cutlery-clatter.wav
How it's made
- Source
- 4-9 utensils fall into a drawer tray; 0.4-2 ms filtered noise excites each metal contact.
- Body
- each utensil has six inharmonic flexural modes, roughly 0.9-9 kHz; T60 is 90-330 ms. Upper modes decay first; close split modes add slight beating without a sustained bell tone.
- Tray
- each landing adds a soft 4 ms contact and damped 260/610/1130 Hz tray modes, T60 35-80 ms.
- Events
- staggered first landings within 20-200 ms, followed by two weaker, closer rebounds per piece. A faint 15-35 ms filtered scrape follows contact as the utensils slide against the dividers.
- Envelope
- irregular overlapping clinks settle by 700 ms; residual ringing fades by 1.02 s.
- Variation
- seeded timing, utensil tuning, contact strength and narrow stereo position vary independently. Presets change piece count, scattering, utensil size and tray damping; no room reverb is baked in.
| Parameter | Range | Default | Unit | Controls |
|---|---|---|---|---|
| pieces | 4 – 9 | 6 | — | Utensils |
| scatter | 0 – 1 | 0.55 | — | Scatter |
| size | 0 – 1 | 0.5 | — | Utensil size |
| hardness | 0 – 1 | 0.65 | — | Contact hardness |
| damping | 0 – 1 | 0.45 | — | Tray damping |
| seed | int | 1 | — | Variation, reproducible |
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.
Revision history1
- r12026-10-25engine 1.0.1use('XDJC4FDX2G@1')