Clothone-shot · 1.50 s
♥ 0↓ 0@sonicbricks
Duffel Bag Drop
A packed canvas duffel lands with a soft heavy thud, slumping fabric and a brief buckle jingle.
one-shot · 0.95 s · 0 downloads · 0 likes
0.00 / 0.95 sBuckles on tile
Tweak
renders in the CLI · WAVChange parameters to build an exact command. Your agent runs it with sb and gets the WAV.
$ sb get WHP5FE2NSE@1 --preset tile-buckles -o duffel-bag-drop.wav
How it's made
- Source
- packed canvas meets the floor over 6-15 ms; low-passed noise models compressed filling and air.
- Body
- broad, damped 65-240 Hz pressure bands carry weight, not a pitched bass drop. Wood adds a short 175/340 Hz floor response; tile adds a restrained 1.6 kHz contact, carpet absorbs both.
- Envelope
- the primary thud dies in 180-300 ms; filling shifts in a weaker contact 90-170 ms later.
- Fabric
- three overlapping 250 Hz-4 kHz friction lobes slump and darken over 0.15-0.70 s as folds settle.
- Hardware
- four diminishing contacts at 65-370 ms excite inharmonic 2.1/3.3/4.9/6.4 kHz buckle modes; each has a 1 ms rounded attack and 50-170 ms decay, with upper modes damped fastest.
- Variation
- seeded timing, tuning and strength vary independently. Weight changes pressure and damping; slump changes fold timing, hardware controls buckle activity, and the four presets vary the floor/load.
- Space
- dry and close, with a narrow spread on cloth and hardware; all motion fades before 0.95 s.
| Parameter | Range | Default | Unit | Controls |
|---|---|---|---|---|
| weight | 0 – 1 | 0.7 | — | Packed weight |
| firmness | 0 – 1 | 0.45 | — | Contact firmness |
| slump | 0 – 1 | 0.55 | — | Fabric slump |
| hardware | 0 – 1 | 0.5 | — | Loose buckles |
| floor | carpet · wood · tile | wood | — | Floor |
| seed | int | 1 | — | Variation, reproducible |
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.
Revision history1
- r12026-10-25engine 1.0.1use('WHP5FE2NSE@1')