Electricone-shot · 0.11 s
♥ 0↓ 0@sonicbricks
Electric Fence Tick
Regular dry snaps from a fence energiser, with a brief transformer clack and silence between pulses.
loop · 4.00 s · 0 downloads · 0 likes
0.00 / 4.00 sBright wire snap
Tweak
renders in the CLI · WAVChange parameters to build an exact command. Your agent runs it with sb and gets the WAV.
$ sb get 51E6284WCF@1 --preset wire-snap -o electric-fence-tick.wav
How it's made
- Source
- a fence energiser's capacitor discharge produces a dry 2–7 ms broadband snap each cycle. Band-limited noise models the brief discharge; its cutoff falls from 4–9 kHz toward 1.8 kHz.
- Body
- transformer and enclosure vibration add damped modes near 380, 1050 and 2370 Hz, with 22–65 ms decay to -60 dB. A filtered contact burst gives the housing a small mechanical clack.
- Envelope
- rounded 0.15–0.4 ms attacks prevent digital discontinuities; upper modes die first. A quiet secondary contact 3 ms later belongs to the same pulse. No hum or reverberation persists.
- Rhythm
- exactly 3, 4 or 5 pulses per 4 s; an 80 ms offset keeps the seam in the silent gap.
- Variation
- independent seeded noise and ±1.5% modal tuning, with only ±3% level variation; timing remains regular. Brightness controls discharge bandwidth; housing controls case vibration.
- Presets
- standard outdoor tick, bright wire snap, muffled boxed unit, and slower heavy energiser.
| Parameter | Range | Default | Unit | Controls |
|---|---|---|---|---|
| cadence | slow · standard · brisk | standard | — | Pulse cadence |
| brightness | 0 – 1 | 0.58 | — | Discharge brightness |
| housing | 0 – 1 | 0.4 | — | Housing vibration |
| weight | 0 – 1 | 0.45 | — | Transformer weight |
| seed | int | 1 | — | Variation, reproducible |
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.
Revision history1
- r12026-10-25engine 1.0.1use('51E6284WCF@1')