Change parameters to build an exact command. Your agent runs it with sb and gets the WAV.
Command
$ sb get XVRJ4T7DX5@1 -o flag-flapping.wav
How it's made
Source
a flag repeatedly folds and pulls taut on its pole. Filtered noise models fabric friction, with 1 ms attacks and 9–22 ms releases for tension snaps, not electrical impulses.
Body
broad, damped cloth bands at 160–900 Hz make the rounded flap; 0.7–7 kHz folds give close detail. Larger, heavier cloth lowers these bands and lengthens each 55–170 ms billowing envelope.
Envelope
two unequal gust lobes per 8 s cycle accelerate irregular flaps from about 4 to 13 per second. Gust pressure coherently increases wind brightness, flap strength and the proportion of sharp snaps.
Layers
each fold has a low fabric slap, a falling spectral friction band and a delayed recoil; restrained stereo air occupies 100–2400 Hz beneath the close, narrowly positioned fabric.
Variation
seeded timing, strength, band centres, recoil delay and pan avoid mechanical repetition. Four presets contrast taut nylon, heavy canvas, a storm banner and a small flag in separated gusts.
Space
dry close perspective, no tonal pole whistle or reverberation; the engine crossfades the seam.
Parameters
Parameter
Range
Default
Unit
Controls
speed
4 – 13
8
—
Flutter rate
size
0.6 – 1.6
1
—
Fabric weight and size
snap
0 – 1
0.7
—
Tension snaps
gustiness
0 – 1
0.7
—
Gust contrast
air
0 – 1
0.3
—
Air rush
seed
int
1
—
Variation, reproducible
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.