Change parameters to build an exact command. Your agent runs it with sb and gets the WAV.
Command
$ sb get ANZJVZS0MT@1 --preset crisp -o focus-move-tick.wav
How it's made
Source
a feather-light contact on a small glass indicator, such as a lens or a glass key edge. The contact is a sub-millisecond noise tick, high-passed above 4 kHz, so it reads as a sparkle and not a thud.
Body
a thin glass pane rings in stiff, inharmonic modes (fundamental 5–10 kHz, a second mode at about 2.4 times the first, quieter and shorter-lived, and a very quiet extra partial for shimmer). There is no low-frequency housing, so nothing sits under 2 kHz.
Squeak
the pane flexes under the touch, so a faint sine lifts from 0.8 to 1.2 times the pitch in 14 ms.
Envelope
attack under 0.3 ms, the fundamental fades 60 dB in about 30 ms, the upper modes faster; the whole cue is gone by about 0.07 s. Level stays low because a focus cue repeats on every key press.
Variation
`rng` mistunes the modes by about ±2 % and jitters the contact strength, so rapid tabbing through a form does not sound mechanical.
Parameters
Parameter
Range
Default
Unit
Controls
pitch
5000 – 10000
7400
Hz
Pitch
glass
0 – 1
0.7
—
Level of the upper glass partials
decay
0.012 – 0.045
0.034
s
Time for the main mode to fade 60 dB
softness
0 – 1
0.4
—
Rolls off the contact tick
seed
int
1
—
Variation, reproducible
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.