Change parameters to build an exact command. Your agent runs it with sb and gets the WAV.
Command
$ sb get JCMY5R32EC@1 --preset charged-shield -o force-field-hum.wav
How it's made
Source
a shield is an energy field sustained by a power core. Three parts: a mains-like low drone, a thin plasma shimmer riding on it, and corona discharge, the sizzle of tiny sparks leaking from the surface.
Body
the drone is two slightly detuned saw/triangle oscillators at about 55 Hz (beat of 0.25 Hz) plus a sine sub, low-passed near 300 Hz so only the lower harmonics speak. The shimmer is a pair of sines near its 4th and 6th harmonic (about 220 and 330 Hz, detuned apart) and a band-passed noise veil at 1.2 kHz.
Envelope
steady by design. A slow swell (0.5 Hz, 4 cycles per 8 s) pulses the drone amplitude by about 25 %, a 0.25 Hz sweep opens and closes the drone filter, and a random drift gates the sizzle so sparks arrive in clusters, never as a machine-gun pattern.
Sizzle
sparse unipolar impulses (crackle) high-passed at 3.5 kHz and band-limited around 6.5 kHz, independent in left and right so the field feels wide; its level follows the "Sizzle" parameter.
Variation
`rng` detunes the oscillators by a few cents and drives the drifts; presets change the drone pitch, swell speed, shimmer amount and sizzle level (idle core, charged shield, overload, distant barrier).
Parameters
Parameter
Range
Default
Unit
Controls
pitch
40 – 90
55
Hz
Drone pitch
swell
0.25 – 1.5
0.5
Hz
Swell rate
shimmer
0 – 1
0.4
—
Shimmer
sizzle
0 – 1
0.4
—
Sizzle
warmth
0 – 1
0.4
—
Drone brightness
spread
0 – 1
0.7
—
Width
seed
int
1
—
Variation, reproducible
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.