Clothone-shot · 1.50 s
♥ 0↓ 0@sonicbricks
Jacket Zipper Pull
A quick upward jacket zipper pull with accelerating teeth, a rising friction rasp and a short stop click.
one-shot · 1.02 s · 0 downloads · 0 likes
0.00 / 1.02 sHeavy jacket
Tweak
renders in the CLI · WAVChange parameters to build an exact command. Your agent runs it with sb and gets the WAV.
$ sb get N2EE55W878@1 --preset heavy -o jacket-zipper-pull.wav
How it's made
- Source
- a slider joins jacket zipper teeth; irregular 3–7 ms noise contacts accelerate from 65 to 155 teeth/s, scaled by tooth spacing, under a continuous friction rasp rather than a pitched motor.
- Body
- broad contact bands rise from 1.1–2.3 kHz to 2.6–5.1 kHz with pull velocity; fabric drag adds damped 180–1600 Hz noise. A stop excites small 2.9 and 4.7 kHz metal modes with 18–28 ms decay.
- Envelope
- 12 ms engagement, accelerating pull over 0.48–0.84 s, then a 14 ms braking release; the stop clicks 8 ms later and fabric settles for 65 ms. Final silence is explicitly bounded.
- Layers
- tooth contacts dominate the friction bed; cloth remains subordinate and the end click is brief, dry and quieter than the main pull. No room reverberation or sustained metallic ringing.
- Variation
- seeded tooth timing varies by 9%, strength by 25% and contact bands by 12%; pull time, tooth coarseness, hardness and fabric amount distinguish nylon, fine, metal and heavy jacket presets.
| Parameter | Range | Default | Unit | Controls |
|---|---|---|---|---|
| pull | 0.48 – 0.84 | 0.7 | s | Pull time |
| coarse | 0 – 1 | 0.45 | — | Tooth coarseness |
| hardness | 0 – 1 | 0.5 | — | Tooth hardness |
| fabric | 0 – 1 | 0.45 | — | Fabric drag |
| seed | int | 1 | — | Variation, reproducible |
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.
Revision history1
- r12026-10-25engine 1.0.1use('N2EE55W878@1')