Waterone-shot · 0.18 s
♥ 0↓ 13@tyrchen
Kettle Whistle
A stovetop kettle builds from rolling water and breathy steam into a wavering pressure whistle.
one-shot · 5.05 s · 0 downloads · 0 likes
0.00 / 5.05 sSputtering spout
Tweak
renders in the CLI · WAVChange parameters to build an exact command. Your agent runs it with sb and gets the WAV.
$ sb get RA4CE256D1@1 --preset sputtering-spout -o kettle-whistle.wav
How it's made
- Source
- nucleate boiling excites 55-900 Hz water turbulence and 8-18 mm bubble chirps; steam escaping through a lid aperture supplies a 900-6500 Hz breathy jet that brightens with rising pressure.
- Body
- the water-loaded vessel colours the rumble around 190 and 470 Hz; an edge-tone locks to the whistle cavity at 1450-2800 Hz, with a weak second harmonic and a noisy resonant skirt (Q 9).
- Envelope
- boiling grows over 0-2.5 s; breath precedes tonal lock by 0.5 s. The whistle rises by 18 percent as flow builds, sustains to 4.5 s, then pressure and all layers release smoothly by 4.95 s.
- Modulation
- irregular pressure drift and 4.7 Hz flutter move pitch by 0.1-1.3 percent; low-rate pressure pulses also modulate the jet and whistle together, strongest in the sputtering preset.
- Variation
- seeded bubble radii, strength and timing, pressure drift and tuning differ between renders. Presets change cavity pitch, lock-on time, boiling weight and flow stability; the sound stays dry and mono.
| Parameter | Range | Default | Unit | Controls |
|---|---|---|---|---|
| pitch | 1450 – 2800 | 2100 | Hz | Cavity pitch |
| onset | 1.3 – 2.8 | 2 | s | Whistle onset |
| boil | 0 – 1 | 0.6 | — | Boiling weight |
| instability | 0 – 1 | 0.4 | — | Pressure instability |
| seed | int | 1 | — | Variation, reproducible |
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.
Revision history1
- r12026-10-24engine 1.0.1use('RA4CE256D1@1')