Naturetexture · 15 s
♥ 0↓ 1@sonicbricks
Pebble Beach
Rhythmic waves wash over wet pebbles, followed by granular clatter as backwash drags stones seaward.
texture · 15 s · 0 downloads · 0 likes
0.00 / 15 sSheltered laps
Tweak
renders in the CLI · WAVChange parameters to build an exact command. Your agent runs it with sb and gets the WAV.
$ sb get M1Z0SAJGT2@1 --preset sheltered-laps -o pebble-beach.wav
How it's made
- Source
- shore turbulence is independent stereo pink noise, with low surge and brighter aerated wash.
- Body
- wet pebbles collide in damped inharmonic modes at 0.6-6 kHz, with 12-55 ms T60 decay. A 1-3 ms rounded noise strike and 15-65 ms friction tail prevent glassy ringing or bare clicks.
- Envelope
- irregular 5-11 s wave cycles rise over 35% of a cycle; foam peaks later and drains slowly. The backwash peaks at 68% of the cycle, driving 3-85 stone contacts/s after the main water surge.
- Layers
- a quiet offshore bed bridges waves; low wash, foam and granular rolling remain separate.
- Variation
- slow drift warps wave timing and energy; each stone varies size, damping, force and pan. Macros set wave interval, surge, stone size, rolling activity and foam; no enclosed-space reverb.
- Presets
- sheltered laps, heavy cobbles, fine shingle backwash and a softer distant shoreline.
| Parameter | Range | Default | Unit | Controls |
|---|---|---|---|---|
| interval | 5 – 11 | 7.8 | s | Wave interval |
| surge | 0 – 1 | 0.6 | — | Surge weight |
| stones | 0 – 1 | 0.65 | — | Stone activity |
| size | 0 – 1 | 0.5 | — | Pebble size |
| foam | 0 – 1 | 0.5 | — | Foam |
| distance | 0 – 1 | 0.1 | — | Shore distance |
| seed | int | 1 | — | Variation, reproducible |
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.
Revision history1
- r12026-10-24engine 1.0.1use('M1Z0SAJGT2@1')