Change parameters to build an exact command. Your agent runs it with sb and gets the WAV.
Command
$ sb get EQA5GMXQA8@1 --preset soft-cruise -o skateboard-roll.wav
How it's made
Source
urethane wheels on concrete excite continuous 65-1900 Hz rolling noise and fine aggregate chatter. Pink noise supplies the loaded wheel rumble; filtered velvet impulses model individual grain contacts.
Body
each sidewalk joint drives damped deck/truck modes at 175, 430 and 970 Hz (35-85 ms T60). Contact is a rounded 0.7 ms attack with a 4-9 ms release, not a bare digital impulse.
Rhythm
4-12 joints per four seconds. Front and rear axles cross each joint 0.32 intervals apart, representing a 0.38 m wheelbase and roughly 1.2 m slabs. Speed stays steady within each preset.
Modulation
small 0.8 Hz load wander moves rolling level and cutoff; wheel rotation adds shallow flutter.
Variation
independent seeded road grains, joint strength and mode detuning avoid identical impacts. Presets vary speed, wheel hardness, concrete roughness and joint depth; the sound stays dry and close.
Loop
four seconds holds whole joint and wheel-flutter periods; joint pairs sit away from the seam.
Parameters
Parameter
Range
Default
Unit
Controls
joints
4 – 12
6
—
Joints per four seconds
hardness
0 – 1
0.6
—
Wheel hardness
roughness
0 – 1
0.45
—
Concrete roughness
depth
0 – 1
0.75
—
Joint depth
seed
int
1
—
Variation, reproducible
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.