Change parameters to build an exact command. Your agent runs it with sb and gets the WAV.
Command
$ sb get G4A28BMD0E@1 -o sloshing-tank.wav
How it's made
Source
water rolls into alternating walls after a vessel is moved; filtered pink turbulence swells over 70-140 ms, with softer return surges rather than sharp impact transients.
Body
enclosed air and water-loaded walls colour the flow at 150-370 Hz and 1.8/3.1 times that band; low-Q resonances and a 0.7-2.2 kHz low-pass keep the vessel hollow, damped and muffled.
Layers
broad fluid friction underlies the cavity bands; trapped 3.8-8 mm bubbles add brief rising 400-860 Hz gurgles around the wall arrivals, softened by the same enclosure filtering.
Envelope
four irregular surges start near 0, 0.44, 0.90 and 1.34 s; each loses energy and settles over 0.38-0.53 s. A final 140 ms fade ends the action before 2 s, with no external reverberation.
Variation
seeded timing, noise, bubble radii and cavity detuning vary each move. Size changes the cavity; fill reduces air and bubbling; motion changes return strength; muffling controls wall loss.
Presets
small canister has higher gurgles; deep tank has low broad surges; nearly full is muted and restrained; vigorous shake has stronger returns, aeration and wider spectral movement.
Parameters
Parameter
Range
Default
Unit
Controls
size
0 – 1
0.6
—
Vessel size
fill
0 – 1
0.5
—
Fill level
motion
0 – 1
0.55
—
Movement
muffling
0 – 1
0.65
—
Wall muffling
seed
int
1
—
Variation, reproducible
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.