Slot Reel Spin and Stops

Three mechanical reels whir and tick at a slowing rate, locking into place with three distinct clunks.

one-shot · 3.01 s · 0 downloads · 0 likes

0.00 / 3.01 sMP3 preview · Classic cabinet

Preset

Show spectrogram

Free for commercial use. No attribution needed.

Tweak

renders in the CLI · WAV

Change parameters to build an exact command. Your agent runs it with sb and gets the WAV.

Command

$ sb get RE54KV7XZV@1 --preset classic -o slot-reel-spin-and-stops.wav

Source: three rotating drums flick spring detents; 1–3 ms filtered noise excites each tooth contact. Independent tick trains decelerate from 23–32 Hz to 4 Hz as rotational energy is lost to friction.
Body: teeth ring at 850–4100 Hz for 12–38 ms; bearing friction sweeps from 1900 toward 400 Hz. A quiet 90–170 Hz motor fundamental and second harmonic fall with each drum's speed.
Stops: three brake pawls engage sequentially, exciting damped cabinet modes at 155, 337 and 690 Hz and short steel modes at 1430 and 2780 Hz. A weaker latch rebound follows each clunk by 24 ms.
Envelope: 18 ms spin-up; each reel slows throughout its run and fades in 15 ms at its stop. Default stops are 1.73, 2.14 and 2.55 s; cabinet decay ends by 2.95 s, dry with no added room.
Variation: independent seeded tooth strength, timing and tuning; small stereo positions follow reels. Presets vary drum mass, bearing brightness, total run and stop spacing, retaining exactly three stops.

Parameters
Parameter	Range	Default	Unit	Controls
run	2.1 – 2.8	2.55	s	Final stop time
gap	0.24 – 0.55	0.41	s	Stop spacing
mass	0 – 1	0.55	—	Drum mass
brightness	0 – 1	0.5	—	Bearing brightness
seed	int	1	—	Variation, reproducible

The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.

Revision history1