Change parameters to build an exact command. Your agent runs it with sb and gets the WAV.
Command
$ sb get VS2P5Q9T8V@1 --preset possessed -o static-glitch-burst.wav
How it's made
Source
a failing video/signal chain. A hard broadband white-noise burst is the carrier; a pitched digital buzz (band-limited saw plus a harsh upper partial, 90-400 Hz) rides under some bursts like a stuck buffer; a short sub thump marks the instant the signal tears.
Body
the burst is chopped into segments of 20-90 ms. Each segment has its own band-pass colour (the spectrum jumps between segments, like different memory blocks being replayed) and some segments are bit-crushed to few amplitude levels for grit. Gaps between segments are silent, giving the stutter.
Envelope
every segment has 1 ms ramps (no clicks), the overall level decays slightly, and the whole burst is cut abruptly by a 4 ms fade at the end, like a signal dropping out.
Variation
segment layout, colours, gap pattern and buzz pitches come from rng; length, stutter, grit, brightness, buzz and thump are exposed.
Parameters
Parameter
Range
Default
Unit
Controls
length
0.4 – 1.6
0.95
s
Length
stutter
0 – 1
0.5
—
Stutter gaps
grit
0 – 1
0.6
—
Bit-crush grit
brightness
0 – 1
0.5
—
Brightness
buzz
0 – 1
0.35
—
Digital buzz
thump
0 – 1
0.5
—
Onset thump
seed
int
1
—
Variation, reproducible
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.