Change parameters to build an exact command. Your agent runs it with sb and gets the WAV.
Command
$ sb get V5DPTNXKE7@1 --preset pebble -o stone-plunk.wav
How it's made
Source
a stone parts the water with a 3 ms rounded pressure onset and a 20-65 ms filtered splash.
Body
the entrained 10-23 mm air cavity closes 28-62 ms later; its 140-326 Hz bubble chirps upward. A weaker 1.73-ratio damped pressure mode adds a hollow, non-musical pop, not a ringing solid stone.
Layers
a low 90-175 Hz displacement thump precedes the cavity; 2-5 small return droplets follow at 150-490 ms, over a falling 2.8 kHz to 650 Hz turbulence band. No room reverb is added.
Envelope
splash attack 2 ms, cavity attack 2 ms, pressure decay 120-210 ms; water settles by 0.76-0.94 s with a final smooth fade. Higher-frequency spray dies before the low cavity.
small pebble is high and brisk; deep stone is bass-heavy; round plunk isolates the cavity; splashy toss has stronger, wider return spray. All are single entries into deep water.
Parameters
Parameter
Range
Default
Unit
Controls
size
0 – 1
0.66
—
Stone size
splash
0 – 1
0.35
—
Splash
hollow
0 – 1
0.75
—
Cavity depth
settle
0 – 1
0.55
—
Water settling
seed
int
1
—
Variation, reproducible
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.