Change parameters to build an exact command. Your agent runs it with sb and gets the WAV.
Command
$ sb get N32GPK2HGM@1 --preset taut-fly -o tent-wind-flapping.wav
How it's made
Source
wind pressure flexes a nylon tent fly; pink turbulence sits behind close noise-burst flaps.
Body
broad 90–240 Hz panel flex and 350–1800 Hz cloth folds have low Q, with no pitched ringing. The fly attenuates outside air above 650–1600 Hz; nearby fabric retains detail up to 2–5 kHz.
Envelope
shared gusts with 3–8 s pressure wander drive air level, cutoff and 0.5–4 flap clusters/s. Each flap rises in 12–40 ms, relaxes in 120–420 ms and carries irregular 8–23 Hz flutter.
Layers
diffuse muffled air, central pressure, and panned cloth folds; no outdoor wildlife or reverb.
Variation
independent seeded noise, random flap size, position, flutter phase and decay prevent cycles. Wind drives loading, slack deepens and lengthens folds, and shelter darkens the outside air.
Presets
sheltered lull, taut fly, loose fly and squall change flap density, body and spectral balance.
Parameters
Parameter
Range
Default
Unit
Controls
wind
0 – 1
0.55
—
Wind loading
slack
0 – 1
0.55
—
Fly slack
flaps
0 – 1
0.6
—
Flap activity
shelter
0 – 1
0.65
—
Shelter
seed
int
1
—
Variation, reproducible
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.