Change parameters to build an exact command. Your agent runs it with sb and gets the WAV.
Command
$ sb get AXBA6661FS@1 --preset pressure -o toilet-flush-and-refill.wav
How it's made
Source
a cistern releases turbulent water; pink and white noise form a 0.04 s attack and swirling rush.
Body
a porcelain bowl colours the flow at 220-620 Hz (Q 0.8); the draining air column drops in pitch.
Envelope
rush peaks at 0.3 s, drains by 2.9 s; refill opens at 2.15 s and closes softly at 4.85 s.
Events
entrained 7-23 mm air pockets chirp at roughly 140-470 Hz, clustered from 1.2 to 3.2 s. Each pocket adds a 15-90 ms filtered splash; uneven 3-8 Hz flow pulses suggest gulping suction.
Space
quiet 17/29/43 ms damped reflections suggest a small porcelain room without a long reverb wash.
Variation
seeded flow drift, bubble radii, event spacing and pan; force changes rush brightness, pressure also shortens the drain phase; bowl size lowers cavity and bubbles, refill changes valve hiss. Room controls the damped early reflections.
Presets
domestic siphon, forceful pressure flush, quiet refill and a large hollow porcelain bowl.
Parameters
Parameter
Range
Default
Unit
Controls
force
0 – 1
0.55
—
Flush pressure
bowl
0 – 1
0.5
—
Bowl size
refill
0 – 1
0.5
—
Refill valve flow
room
0 – 1
0.35
—
Porcelain room
seed
int
1
—
Variation, reproducible
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.