UIloop · 4.00 s
♥ 0↓ 0@sonicbricks
Unlock Release
A two-stage latch click into a rising tonal flick and an open, bright tail, for unlocking a device or feature
one-shot · 0.31 s · 0 downloads · 0 likes
0.00 / 0.31 sSnappy
Preset
Tweak
renders in the CLI · WAVChange parameters to build an exact command. Your agent runs it with sb and gets the WAV.
$ sb get H61CK0AQBZ@1 --preset snappy -o unlock-release.wav
How it's made
- Source
- a small latch letting go. Stage one is a dull catch click (the pawl lifting, ≈ 1.2 ms noise burst); stage two, 25–60 ms later, is a brighter release click as the spring-loaded part snaps free.
- Body
- the casing rings in two damped modes (≈ 2.4 kHz and ×2.3) on the first click and a higher pair (≈ 3.4 kHz and ×2.7) on the second; a short low thock (≈ 260 Hz) gives the first click weight.
- Flick
- the freed spring sings as a rising sine glide (≈ 700 → 2000 Hz in 90 ms, exponential) with a quiet octave partial, fading over ≈ 0.12 s; a 3 ms onset ramp keeps it click-free.
- Tail
- the open feel is an airy band of high-passed noise (above ≈ 5 kHz) opening as the flick rises, plus two light high modes (≈ 5.2 and 7.4 kHz) that ring ≈ 0.12 s and die before 0.3 s.
- Variation
- `rng` mistunes the modes and glide by ±3 % and jitters the click gap; `brightness`, `snap`, `lift` and `tail` set the click colour, gap, glide interval and air amount; presets pick distinct uses.
| Parameter | Range | Default | Unit | Controls |
|---|---|---|---|---|
| brightness | 0 – 1 | 0.5 | — | Brightness |
| snap | 0 – 1 | 0.5 | — | Shorter gap and harder second click |
| lift | 0 – 1 | 0.5 | — | Size of the rising glide |
| tail | 0 – 1 | 0.5 | — | Open tail |
| pitch | 450 – 1100 | 700 | Hz | Flick start pitch |
| seed | int | 1 | — | Variation, reproducible |
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.
Revision history1
- r12026-10-24engine 1.0.1use('H61CK0AQBZ@1')