Alarmsone-shot · 4.05 s
♥ 0↓ 0@sonicbricks
Warning Buzzer
A low-mid electromechanical control-panel buzzer pulsing with square-wave rasp and diaphragm bite
loop · 2.00 s · 0 downloads · 0 likes
0.00 / 2.00 sUrgent short pulses
Tweak
renders in the CLI · WAVChange parameters to build an exact command. Your agent runs it with sb and gets the WAV.
$ sb get EH7C4C2H6D@1 --preset urgent -o warning-buzzer.wav
How it's made
- Source
- an electromagnetic panel buzzer driven by a band-limited 140–360 Hz square wave. A weak second harmonic and 45 Hz amplitude ripple represent asymmetric diaphragm motion.
- Body
- a broad diaphragm resonance at 3.2 times the drive pitch adds nasal bite; a 1.4–4.8 kHz low-pass bounds the rasp. Filtered contact noise and a 640 Hz panel mode add mechanical grain.
- Envelope
- 2–8 pulses per two-second cycle, 38–82 percent on-time, 5 ms attack and 14 ms release. Pitch settles down 1.2 percent in 35 ms; brightness relaxes over 65 ms as the coil loads.
- Layers
- the drive dominates, the resonant branch is 22 percent, and contact noise is at most 7 percent; the panel's 45 ms ring follows a quiet 6 ms contact excitation. Dry centred output.
- Variation
- seeded component tolerance shifts tuning by at most 0.2 percent per build. Presets change pulse count, duty, pitch, spectral bite and contact grain for four panel roles.
- Loop
- integer pulse counts align to two seconds; every pulse and panel ring ends before the next.
| Parameter | Range | Default | Unit | Controls |
|---|---|---|---|---|
| pitch | 140 – 360 | 240 | Hz | Drive pitch |
| pulses | 2 – 8 | 4 | — | Pulses per cycle |
| duty | 0.38 – 0.82 | 0.58 | — | On-time ratio |
| bite | 0 – 1 | 0.65 | — | Diaphragm bite |
| grain | 0 – 1 | 0.25 | — | Contact grain |
| seed | int | 1 | — | Variation, reproducible |
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.
Revision history1
- r12026-10-25engine 1.0.1use('EH7C4C2H6D@1')