Change parameters to build an exact command. Your agent runs it with sb and gets the WAV.
Command
$ sb get K2WKNJWXJA@1 -o water-into-a-glass.wav
How it's made
Source
a narrow water jet breaks on the water surface, producing fluctuating 350 Hz-7 kHz turbulence.
Body
the shrinking air column has a broad c/4L resonance; L falls from 11-19 cm to 3-6 cm while filling. Its weak third partial follows the rise; low-Q filtering avoids a pitched whistle.
Bubbles
entrained 1-6 mm air pockets make damped Minnaert chirps; larger clustered pockets give gurgle.
Surface
overlapping 8-30 ms filtered noise splashes add granular detail, with two final drips.
Glass
faint, damped inharmonic wall resonances fall slightly as water mass loads the vessel.
Envelope
the jet ramps up over 130 ms, fluctuates during the pour, then tapers off before residual drips.
Variation
seeded timing, radius, strength and narrow stereo positions differ independently per event.
Parameters
Parameter
Range
Default
Unit
Controls
flow
0 – 1
0.55
—
Jet strength
depth
0 – 1
0.5
—
Glass depth
gurgle
0 – 1
0.45
—
Gurgle
fill
0 – 1
0.65
—
Fill rise
seed
int
1
—
Variation, reproducible
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.