Householdloop · 6.00 s
♥ 0↓ 0@sonicbricks
Zipper Pull
A jacket or bag zipper pulled closed, with accelerating teeth, dry friction and a small end stop.
one-shot · 0.82 s · 0 downloads · 0 likes
0.00 / 0.82 sFine nylon jacket
Tweak
renders in the CLI · WAVChange parameters to build an exact command. Your agent runs it with sb and gets the WAV.
$ sb get 1TS8AD51N4@1 --preset nylon-jacket -o zipper-pull.wav
How it's made
- Source
- a slider interlocks zipper teeth; 0.5 ms attacks and 3-7 ms noise releases make a dry rasp.
- Events
- tooth rate rises from 36-70 to 100-195 Hz as the hand accelerates over a 0.38-0.84 s pull. Spacing jitters by 6 percent and tooth strength varies by 25 percent, avoiding a perfect buzz.
- Body
- the slider has damped 1.7, 3.9 and 6.2 kHz modes, with 4-24 ms decays; metal raises their mix and ring time.
- Layers
- sliding friction brightens from 1.2 to 3.4 kHz; cloth adds a soft 350-1800 Hz swish. A restrained 12 ms contact at the top stop ends the pull, followed by 50 ms of cloth settling.
- Envelope
- 12 ms onset, increasing friction and density, then a 25 ms braking taper; dry mono close Foley.
- Variation
- seeded timing, grain tuning and levels; presets cover fine nylon, metal, coarse bag and quick.
| Parameter | Range | Default | Unit | Controls |
|---|---|---|---|---|
| length | 0.38 – 0.84 | 0.64 | s | Pull duration |
| coarse | 0 – 1 | 0.45 | — | Tooth size |
| metal | 0 – 1 | 0.35 | — | Metal contact |
| cloth | 0 – 1 | 0.35 | — | Fabric movement |
| seed | int | 1 | — | Variation, reproducible |
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.
Revision history1
- r12026-10-25engine 1.0.1use('1TS8AD51N4@1')