Footstepstexture · 10 s
♥ 0↓ 0@sonicbricks
Armored Walk
Steady heavy armored footsteps with overlapping plate clanks and swinging chain rustle, dry and loopable.
loop · 6.00 s · 0 downloads · 0 likes
0.00 / 6.00 sEarth march
Tweak
renders in the CLI · WAVChange parameters to build an exact command. Your agent runs it with sb and gets the WAV.
$ sb get CEDDCP22D3@1 --preset earth-march -o armored-walk.wav
How it's made
- Source
- armored boots land heel first, then toe 75-105 ms later; filtered noise excites the ground.
- Body
- boot weight is a damped 78-170 Hz cluster, not a sustained bass tone. Timber adds 190-780 Hz modes.
- Plates
- overlapping steel plates collide 20-220 ms after landing, exciting inharmonic 480-4900 Hz modes. Lower modes decay in 170-290 ms; upper modes die in 65-120 ms as straps and padding absorb vibration.
- Chain
- many small link contacts form a 1.6-7 kHz grainy rustle, swelling during the leg swing and settling.
- Envelope
- 2-7 ms impact attacks, a softer toe roll, staggered plate rebounds and a 280 ms chain envelope. Six seconds holds 12 steady, 10 deliberate or 16 brisk steps; left/right feet alternate narrow pan.
- Variation
- seeded contact strength, modal tuning, rebound delays and chain grain vary independently. Presets change ground, cadence, carried weight and how loosely the plates and chain move; no room reverb.
| Parameter | Range | Default | Unit | Controls |
|---|---|---|---|---|
| ground | stone · earth · timber | stone | — | Ground |
| cadence | steady · deliberate · brisk | steady | — | Cadence |
| weight | 0 – 1 | 0.72 | — | Boot weight |
| looseness | 0 – 1 | 0.55 | — | Plate looseness |
| chain | 0 – 1 | 0.5 | — | Chain movement |
| seed | int | 1 | — | Variation, reproducible |
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.
Revision history1
- r12026-10-25engine 1.0.1use('CEDDCP22D3@1')