Change parameters to build an exact command. Your agent runs it with sb and gets the WAV.
Command
$ sb get T65XYWX54Z@1 -o chisel-tap.wav
How it's made
Source
a steel hammer taps a hand-held chisel; a 0.25 ms attack and 2 ms filtered noise pulse excite the tool. A separate 5 ms stone-contact burst follows by 0.7 ms through the chisel.
Body
gripped steel has inharmonic modes near 2.1, 3.4, 5.3 and 7.6 kHz, T60 65-300 ms; stone has dense, strongly damped modes at 480-3900 Hz, T60 22-85 ms, without a hollow boom.
Envelope
the bright tick leads a dry stone click; high steel modes die before the lower ones. Fracture noise darkens from 7.5 to 2.2 kHz in 75 ms; discrete chips settle by 280 ms.
Events
eight irregular, progressively weaker chip contacts, each a 2-7 ms filtered noise grain, with short mineral resonances and narrow stereo scatter; no room reverberation is added.
Variation
seeded mode tuning varies by 2 percent, chip timing, frequency, strength and pan vary. Tool size shifts steel modes; bite changes contact hardness; grit controls fracture and chips; grip controls damping. Presets cover fine carving, granite dressing, sandstone and an open grip.
Parameters
Parameter
Range
Default
Unit
Controls
size
0 – 1
0.45
—
Chisel size
bite
0 – 1
0.65
—
Stone hardness
grit
0 – 1
0.45
—
Loose chips
grip
0 – 1
0.65
—
Grip damping
seed
int
1
—
Variation, reproducible
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.