Stonetexture · 15 s
♥ 0↓ 0@sonicbricks
Chisel Tap
A hammer tapping a steel chisel into stone: a bright metal tick, hard mineral click and falling grit.
one-shot · 0.60 s · 0 downloads · 0 likes
0.00 / 0.60 sFine limestone carving
Tweak
renders in the CLI · WAVChange parameters to build an exact command. Your agent runs it with sb and gets the WAV.
$ sb get T65XYWX54Z@1 --preset fine-carving -o chisel-tap.wav
How it's made
- Source
- a steel hammer taps a hand-held chisel; a 0.25 ms attack and 2 ms filtered noise pulse excite the tool. A separate 5 ms stone-contact burst follows by 0.7 ms through the chisel.
- Body
- gripped steel has inharmonic modes near 2.1, 3.4, 5.3 and 7.6 kHz, T60 65-300 ms; stone has dense, strongly damped modes at 480-3900 Hz, T60 22-85 ms, without a hollow boom.
- Envelope
- the bright tick leads a dry stone click; high steel modes die before the lower ones. Fracture noise darkens from 7.5 to 2.2 kHz in 75 ms; discrete chips settle by 280 ms.
- Events
- eight irregular, progressively weaker chip contacts, each a 2-7 ms filtered noise grain, with short mineral resonances and narrow stereo scatter; no room reverberation is added.
- Variation
- seeded mode tuning varies by 2 percent, chip timing, frequency, strength and pan vary. Tool size shifts steel modes; bite changes contact hardness; grit controls fracture and chips; grip controls damping. Presets cover fine carving, granite dressing, sandstone and an open grip.
| Parameter | Range | Default | Unit | Controls |
|---|---|---|---|---|
| size | 0 – 1 | 0.45 | — | Chisel size |
| bite | 0 – 1 | 0.65 | — | Stone hardness |
| grit | 0 – 1 | 0.45 | — | Loose chips |
| grip | 0 – 1 | 0.65 | — | Grip damping |
| seed | int | 1 | — | Variation, reproducible |
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.
Revision history1
- r12026-10-25engine 1.0.1use('T65XYWX54Z@1')