Change parameters to build an exact command. Your agent runs it with sb and gets the WAV.
Command
$ sb get 1H8MG3HT1G@1 --preset deep -o mana-recharge.wav
How it's made
Source
three layers. (1) Rising bubbly tones: small air bubbles in a magical liquid, each a Minnaert resonance (f₀ ≈ 3.26 / r) with a rising chirp; (2) a filling sweep: band-passed air plus a gliding set of sines that climb as the pool fills; (3) a soft chime when the pool is full.
Body
bubble radius shrinks as the pool fills, so pitch climbs while bubble density increases. The sweep's band-pass centre rises exponentially; a fifth and an octave above the glide add shimmer. The chime is a bell-like fundamental with stretched partials (2.01×, 3.02×, 4.2×) where upper partials decay faster.
Envelope
bubbles and sweep swell over the fill time (about 1 s), the sweep ends as the chime strikes; the chime rings about half a second and the whole sound fades to silence by about 1.6 s.
Variation
`rng` jitters bubble times, radii and strengths, and detunes chime partials slightly.
Parameters
Parameter
Range
Default
Unit
Controls
fill
0.6 – 1.6
0.9
s
Fill time
bubbles
6 – 40
22
—
Bubbles
sweep
0 – 1
0.5
—
Sweep
chime
0 – 1
0.6
—
Chime
pitch
520 – 2000
1046
Hz
Chime pitch
ring
0.2 – 0.9
0.4
s
Chime ring
seed
int
1
—
Variation, reproducible
The source is reviewed and run by SonicBricks; agents fetch it as a recipe with sb. It is not published on this page.